Netgear WNR612v3 - Wireless-N 150 2-Port Router 사용자 설명서

다운로드
페이지 99
Getting Started with NETGEAR genie
14
N150 2-Port Wireless Router WNR612v3 
Use NETGEAR genie After Installation
When you first set up your router, NETGEAR genie automatically starts when you launch an 
Internet browser on a computer that is connected to the router. You can use NETGEAR genie 
again if you want to view or change settings for the router.
1. 
Launch your browser from a computer or wireless device that is connected to the router.
2. 
Type http://www.routerlogin.net or http://www.routerlogin.com.
The login window displays:
admin
********
3. 
Enter admin for the router user name and password for the router password, both in 
lowercase letters. 
Note:
 
The router user name and password are different from the user name 
and password for logging in to your Internet connection. See 
Upgrade Router Firmware
When you set up your router and are connected to the Internet, the router automatically 
checks for you to see if newer firmware is available. If it is, a message is displayed on the top 
of the screen. See 
51 for more information about upgrading 
firmware.
Click the message when it shows up and click Yes to upgrade the router with the latest 
firmware. After the upgrade, the router restarts.
CAUTION:
Do not try to go online, turn off the router, shut down the computer, or do 
anything else to the router until the router finishes restarting and the Power 
LED has stopped blinking for several seconds.