Netgear WNR612v3 - Wireless-N 150 2-Port Router 사용자 설명서

Restrict Wireless Access by MAC Address

You can set up a list of computers and wireless devices that are allowed to join the wireless 
network. This list is based on the unique MAC address of each computer and device.

Each network device has a MAC address, which is a unique 12-character physical address, 
containing the hexadecimal characters 0–9, a–f, or A–F only, and separated by colons (for 
example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the label of the wireless 
card or network interface device. If you do not have access to the label, you can display the 
MAC address using the network configuration utilities of the computer. You might also find 
the MAC addresses in the Attached Devices screen.



Select Advanced > Advanced Setup > Wireless Settings and click the Setup Access 
List

 to display the Wireless Card Access List.

Click Add to add a wireless device to the wireless access control list. 

The Wireless Card Access Setup screen opens and displays a list of currently active 
wireless cards and their Ethernet MAC addresses.

If the computer or device you want is in the Available Wireless Cards list, select that radio 

button; otherwise, type a name and the MAC address. You can usually find the MAC 

address on the bottom of the wireless device.

You can copy and paste the MAC addresses from the Attached Devices 

screen into the MAC Address field of this screen. To do this, use each 
wireless computer to join the wireless network. The computer should 
then appear in the Attached Devices screen.

Click Add to add this wireless device to the Wireless Card Access List. The screen changes 

back to the list screen. 

Add each computer or device you want to allow to connect wirelessly.

Select the Turn Access Control On check box.

Click Apply.