Netgear WNR612v3 - Wireless-N 150 2-Port Router 사용자 설명서

Click Apply so that your changes take effect.

When you access your router from the Internet, type your router’s WAN IP address into your 

browser’s address or location field followed by a colon (:) and the custom port number. For 

example, if your external address is 134.177.0.123 and you use port number 8080, enter 
http://134.177.0.123:8080

 in your browser.

Universal Plug and Play

Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, 
access the network and connect to other devices as needed. UPnP devices can 
automatically discover the services from other registered UPnP devices on the network.

If you use applications such as multiplayer gaming, peer-to-peer connections, or real-time 
communications such as instant messaging or remote assistance (a feature in Windows XP), 
you should enable UPnP.



Select Advanced > Advanced Setup > UPnP. The UPnP screen displays. 

Adjust the following settings as needed:

. UPnP can be enabled or disabled for automatic device configuration. 

The default setting for UPnP is disabled. If this check box is not selected, the router does 
not allow any device to automatically control the resources, such as port forwarding 
(mapping) of the router. 

. The advertisement period is how often the router broadcasts its 

UPnP information. This value can range from 1 to 1440 minutes. The default period is 30 
minutes. Shorter durations ensure that control points have current device status at the 
expense of additional network traffic. Longer durations can compromise the freshness of 
the device status, but can significantly reduce network traffic.

. The time to live for the advertisement is measured in hops 

(steps) for each UPnP packet sent. The time to live hop count is the number of steps a 
broadcast packet is allowed to propagate for each UPnP advertisement before it 
disappears. The number of hops can range from 1 to 255. The default value for the