Netgear WNR612v3 - Wireless-N 150 2-Port Router 사용자 설명서

Wireless LED Is Off

If the Wireless LEDs stay off, check to see if the Wireless radio has been disabled in the 

60). The Wireless 

LED is lit when the wireless radio is turned on.

Cannot Log In to the Router

If you are unable to log in to the router from a computer on your local network, check the 
following:

If you are using an Ethernet-connected computer, check the Ethernet connection 

between the computer and the router as described in the previous section.

Make sure that your computer’s IP address is on the same subnet as the router. If you are 

using the recommended addressing scheme, your computer’s address should be in the 
range of 192.168.1.2 to 192.168.1.254. 

If your computer’s IP address is shown as 169.254.x.x, recent versions of Windows and 

MacOS generate and assign an IP address if the computer cannot reach a DHCP server. 
These autogenerated addresses are in the range of 169.254.x.x. If your IP address is in 
this range, check the connection from the computer to the router, and reboot your 
computer.

If your router’s IP address was changed and you do not know the current IP address, 

clear the router’s configuration to factory defaults. This sets the router’s IP address to 
192.168.1.1. This procedure is explained in 

Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using 

Internet Explorer, click Refresh to be sure that the Java applet is loaded.

Try quitting the browser and launching it again.

Make sure that you are using the correct login information. The factory default login name 

is admin, and the password is password. Make sure that Caps Lock is off when you 
enter this information.

If you are attempting to set up your NETGEAR router as an additional router behind an 

existing router in your network, consider replacing the existing router. NETGEAR does 
not support such a configuration.

If you are attempting to set up your NETGEAR router as a replacement for an ADSL 

gateway in your network, the router cannot perform many gateway services. For 
example, the router cannot convert ADSL or cable data into Ethernet networking 
information. NETGEAR does not support such a configuration.

Cannot Access the Internet

If you can access your router but not the Internet, check to see if the router can obtain an IP 
address from your Internet service provider (ISP). Unless your ISP provides a fixed IP 
address, your router requests an IP address from the ISP. You can determine whether the 
request was successful using the Router Status screen.