Netgear WNR3500Lv1 - N300 Wireless Gigabit Router 설치 가이드

Troubleshooting

30

If you have difficulties accessing the Internet, use the Basic Setup Checklist to make sure that you 
have connected and set up your router correctly. If your basic setup is correct, then look for your 
problem in one of the subsequent sections.

The following items are the most common errors made when initially setting up a router. Carefully 
review the checklist to make sure that you have followed the recommended procedures.

•

Be sure you always start your network in this sequence: 

1. Turn off and unplug the modem from the power outlet. Next, turn off the N300 Wireless 

router and computer.

2. Turn on the modem and wait 2 minutes.

3. Turn on the N300 Wireless router and wait 1 minute.

4. Turn on the computer. 

•

Make sure the Ethernet cables are securely plugged in. 

–

The Internet status light on the N300 Wireless router will be lit if the Ethernet cable to the 
N300 Wireless router from the modem is plugged in securely and the modem and N300 
Wireless router are both turned on (see 

).

–

For each powered-on computer connected to the N300 Wireless router with a securely 
plugged-in Ethernet cable, the corresponding N300 Wireless router LAN port status light 
will be lit. The label on the back of the N300 Wireless router identifies the number of each 
LAN port (see 

For more information, refer to the online User Manual. A link to this document is 
included on the Resource CD, and is also available from the router interface, after the 
router is installed. Click Documentation on the main menu.