Netgear WNR3500Lv1 - N300 Wireless Gigabit Router 설치 가이드

Troubleshooting

33

b. Clear the router’s configuration to factory defaults. This will set the router’s IP address to 

192.168.1.1. This procedure is explained in 

c.

Turn the power off and back on to see if the router recovers.

•

Internet or LAN Port Lights Not On. If either the LAN or Internet lights do not light when 
the Ethernet connection is made, check the following:

a.

Make sure that the Ethernet cable connections are secure at the router and at the computer.

b. Make sure that power is turned on to the connected computer.

c.

Be sure you are using Ethernet cables like the cable that was supplied with the N300 
Wireless router.

See 

 for instructions.

For more information on WPS functionality and advanced features, see the online User Manual.

If you are unable to log in to the N300 Wireless router, check the following:

•

If you are using an Ethernet-connected computer, check the Ethernet connection between the 
computer and the router as described in 

.

•

Make sure you are using the correct login information. The factory default login name is 
admin and the password is password. Make sure that the Caps Lock is off when entering this 
information.

•

Make sure your computer’s IP address is on the same subnet as the router. If your are using the 
recommended addressing scheme, your computer’s address should be in the range of 
192.168.1.2 to 192.168.1.254. Refer to your computer’s documentation or see 

your computer. 

•

If your router’s IP address has been changed and you don’t know the current IP address, log 
into the router at its default IP address of http://www.routerlogin.net (see 

If your computer cannot reach a DHCP server, some operating systems will 
assign an IP address in the range 169.254.x.x. If your IP address is in this range, 
verify that you have a good connection from the computer to the router, then 
restart (reboot) your computer.