Netgear WNR2020v2 - 5PT N300 Wireless Router 사용자 설명서

Select ADVANCED > Setup > LAN Setup.

In the IP Address field, type the IP address.

In the IP Subnet Mask, type the subnet mask of the router. 

The IP address and subnet mask identifies which addresses are local to a specific device 
and which must be reached through a gateway or router.

Click the Apply button.

Your changes are saved.

If you changed the LAN IP address of the router, you are disconnected when this change 
takes effect.

To reconnect, close your browser, relaunch it, and log in to the router

By default, the router acts as a Dynamic Host Configuration Protocol (DHCP) server. The 
router assigns IP, DNS server, and default gateway addresses to all computers connected to 
the LAN. The assigned default gateway address is the LAN address of the router. 

These addresses must be part of the same IP address subnet as the router’s LAN IP 
address. Using the default addressing scheme, define a range between 192.168.1.2 and 
192.168.1.254, although you can save part of the range for devices with fixed addresses.

The router delivers the following parameters to any LAN device that requests DHCP:

An IP address from the range that you have defined

Subnet mask

Gateway IP address (the router’s LAN IP address)

DNS server IP address (the router’s LAN IP address)



Launch a web browser from a computer or wireless device that is connected to the 

network.