Netgear WNR2020v2 - 5PT N300 Wireless Router 사용자 설명서

A login screen displays.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

The BASIC Home screen displays.

Click the ADVANCED tab.

The Router Status screen displays.

On the Internet Port pane, click the Connection Status button.

show valid information, including valid IP addresses, your PPPoE connection is up and 
working.

If any of the fields show incomplete information, or no valid IP address, you can attempt 
to reconnect by clicking the Connect button. The router continues to attempt to connect 
indefinitely.

If you cannot connect after several minutes, you might be using an incorrect service name, 
user name, or password. There might also be a provisioning problem with your ISP.

Unless you connect manually, the router does not authenticate using 
PPPoE until data is transmitted to the network.

Most network devices and routers contain a ping utility that sends an echo request packet to 
the designated device. The device then responds with an echo reply. You can troubleshoot a 
network by using the ping utility on your computer or workstation. 

You can ping the router from your computer to verify that the LAN path to your router is set up 
correctly.



From the Windows toolbar, click the Start button and select Run.

In the field provided, type ping followed by the IP address of the router, as in this example:

Click the OK button.

You should see a message like this one: