Netgear WNR2000v2 - N300 Wireless Router 사용자 설명서

Customizing Your Network Settings

4-12

6. In the Destination IP Address field, enter the IP address of the final destination. 

7. In the IP Subnet Mask field, enter the IP subnet mask for this destination.

If the destination is a single host, enter 255.255.255.255. 

8. In the Gateway IP Address field, enter the gateway IP address, which must be a router on the 

same LAN segment as the WNR2000v2 router. 

9. In the Metric field, enter a number between 1 and 15 as the metric value. 

This represents the number of routers between your network and the destination. Usually, a 
setting of 2 or 3 works, but if this is a direct connection, set it to 1. 

10. Click Apply to have the static route entered into the table.

You can view or change wireless repeater settings for the wireless router. From the main menu of 
the browser interface, under Advanced, click Wireless Repeating Function to display the 
Wireless Repeating Function screen.