Netgear WNR2500 - N450 Wireless Router 설치 가이드

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered 
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other 
countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.

NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA

This product has a unique WiFi network name (SSID) and network key (password). 
The default SSID and password are uniquely generated for every device (like a 
serial number) to protect and maximize your wireless security. This information is 
located on the label on the product. 

NETGEAR recommends that you do not change the preset SSID or password. If you 
do change the settings, the information on the product label does not apply.

 WiFi network name (SSID) _______________________________

If you change the preset wireless settings, record them here:

 Wireless network name (SSID) _______________________________

 Network key (password) _____________________________________

If necessary to retrieve or update your password, enter
http://www.routerlogin.net

 

in a web browser and log in using the 

default user name (admin)

 

and password (password). 

Select Wireless Settings to locate your wireless password.

Choose either the manual or the Wi-Fi Protected Setup (WPS) method to add 
wireless computers and other devices to your wireless network. 

Open the software utility that manages your wireless connections on the 
wireless device that you want to connect to your router (smartphone, laptop, 
computer, or gaming device).

This utility scans for all wireless networks in your area. 

Look for the preset NETGEAR wireless network name (SSID), and select it.

The SSID is located on the product label of the router.

If you changed the name of your network during the setup process, look for 

that network name. 

Enter the preset password (or your custom password if you changed it), and 
click the Connect button.

Repeat steps 1–3 to add other wireless devices.

If your wireless device supports WPS (Wi-Fi Protected Setup), which NETGEAR 
calls Push 'N' Connect, you might be prompted to press the WPS button on the 
router instead of entering a password. If this happens:

Press the WPS button 

 on the router.

Within two minutes, press the WPS button on the client device, or follow the 
WPS instructions that came with your wireless device to complete the WPS 
process. 

The device will then be connected to your router. 

Repeat this process to add other WPS wireless devices.

WPS does not support WEP security. If you try to connect a WEP client to 

your network using WPS, it will not work.

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product and 

You must register your product before you can use NETGEAR telephone support. 
NETGEAR recommends registering your product through the NETGEAR website. 
For product updates and web support, visit 

.

NETGEAR recommends that you use only the official NETGEAR support resources.

You can get the user manual online at 

 or through 

a link in the product’s user interface.

For the current EU Declaration of Conformity, visit 

Internet

STATUS

 GOOD

 

Network Map

Number of devices 16

 

Parental Controls

WiFi Connection 

STATUS

 Connected

Router Settings

Click here

ReadySHARE

Click here

Click here

Automatically fix common network problems and

easily manage your home network connections.

Visit 

.