Netgear WNR1000v2 - N150 Wireless Router 사용자 설명서

Safeguarding Your Network

2-15

The green 

 light on the WNR1000v2 router begins to blink in a regular pattern. While the 

button light is blinking, you have 2 minutes to enable WPS on the device you are trying to 
connect to the router.

5. In the wireless client, follow its specific networking instructions to enable WPS, to allow it to 

connect to the router.

The WNR1000v2 router’s green 

 light ceases blinking and remains on when one of these 

conditions occurs:

•

The router and the client establish a wireless connection.

•

The 2-minute window period expires for establishing a WPS connection. If the connection 
is not established, no WPS security settings will be specified in the WNR1000v2 router.

There are two ways to enable a wireless client to join a network using a PIN: using the router’s 
security PIN or using the wireless client’s security PIN.

1. Obtain your router’s security PIN from the rear panel of the router or from the Advanced 

Wireless Settings screen.

2. On the wireless client, follow its specific networking instructions to enter the router’s security 

PIN and to establish a wireless connection with the router.

1. Log in to the router as described in 

.

2. Select Add WPS Client in the main menu, and click Next.

3. Select the PIN Number setup method.