Netgear WNR1000v2 - N150 Wireless Router 사용자 설명서
Wireless-N 150 Router WNR1000v2 User Manual
Safeguarding Your Network
2-21
v1.0, November 2009
To change the administrator password:
1. On the main menu, under Maintenance, select Set Password to display the Set Password
screen.
2. To change the password, first enter the old password, then enter the new password twice.
3. Click Apply.
Backing Up Your Configuration
The configuration settings of the WNR1000v2 router are stored within the router in a
configuration file. You can back up (save) this file and retrieve it later. NETGEAR recommends
that you save your configuration file after you complete the configuration. If the router fails or
becomes corrupted, or an administrator password is lost, you can easily re-create your
configuration by restoring the configuration file.
configuration file. You can back up (save) this file and retrieve it later. NETGEAR recommends
that you save your configuration file after you complete the configuration. If the router fails or
becomes corrupted, or an administrator password is lost, you can easily re-create your
configuration by restoring the configuration file.
Figure 2-13
Tip: Before saving your configuration file, change the administrator password to the
default, password. Then change it again after you have saved the configuration file.
If you save the file with a new password, and then you later forget the new
password, you will have to reset the router back to the factory defaults and log in
using the default password of password. This means you will have to re-enter all the
router configuration settings.
If you save the file with a new password, and then you later forget the new
password, you will have to reset the router back to the factory defaults and log in
using the default password of password. This means you will have to re-enter all the
router configuration settings.