Netgear WG111T - 108 Mbps Wireless USB Adapter 사용자 설명서

2-7

4. Verify wireless connectivity to your network.

Use a browser to connect to the Internet, or check for file and printer access on your network. 
You can check the status bar in the Smart Wizard for the current connection status.

The Computer-to-Computer setting uses Ad Hoc mode. Ad Hoc mode is an 802.11 networking 
framework in which devices or computers communicate directly with each other, without the use 
of an access point. For example, this mode is used when two Windows computers are configured 
with file and print sharing enabled and you want to exchange files directly between them. 

To create an Ad Hoc mode profile:

1. Use the 

 icon to open the Smart Wizard. The Settings page opens:

Note: If you cannot connect, see 

accessing network resources, the Windows Client and File and Print Sharing 
software might not be installed and configured properly on your computers. Please 
refer to 

Note: Ad Hoc mode will not work using DHCP settings. Ad Hoc mode requires either 

static IP addresses (such as 

192.168.0.1)

 or the IPX protocol. For instructions on 

setting up static IP addresses on a Windows PC, refer to the PC Networking 
Tutorial on the NETGEAR CD.