Netgear WGT624v2- 108 Mbps Wireless Firewall Router 참조 매뉴얼
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
5-4
Content Filtering
M-10153-01
the application. This information can usually be determined by contacting the publisher of the
application or from user groups of newsgroups.
application or from user groups of newsgroups.
Enter the Starting Port and Ending Port numbers. If the application uses a single port number, enter
that number in both boxes.
that number in both boxes.
If you know that the application uses either TCP or UDP, select the appropriate protocol. If you are
not sure, select Both.
not sure, select Both.
•
Configuring Services Blocking by IP Address Range
Under “Filter Services For”, you can block the specified service for a single PC, a range of PCs
(having consecutive IP addresses), or all PCs on your network.
(having consecutive IP addresses), or all PCs on your network.
Scheduling When Blocking Will Be Enforced
The WGT624 v2 wireless router allows you to specify when blocking will be enforced. The
Schedule menu is shown below:
Schedule menu is shown below:
Figure 5-4: Schedule menu
Use this check boxes on this menu to create a schedule for blocking content. Click Apply.