Netgear WGT624v2- 108 Mbps Wireless Firewall Router 참조 매뉴얼

Troubleshooting

7-5

OR

Configure your router to spoof your PC’s MAC address. This can be done in the Basic Settings 
menu. Refer to 

If your router can obtain an IP address, but your PC is unable to load any web pages from the 
Internet:

•

Your PC may not recognize any DNS server addresses. 

A DNS server is a host on the Internet that translates Internet names (such as www addresses) 
to numeric IP addresses. Typically your ISP will provide the addresses of one or two DNS 
servers for your use. If you entered a DNS address during the router’s configuration, reboot 
your PC and verify the DNS address as described in 

. Alternatively, you may configure your PC manually with DNS addresses, as 

explained in your operating system documentation.

•

Your PC may not have the router configured as its TCP/IP gateway.

If your PC obtains its information from the router by DHCP, reboot the PC and verify the 
gateway address as described in 

.

Most TCP/IP terminal devices and routers contain a ping utility that sends an echo request packet 
to the designated device. The device then responds with an echo reply. Troubleshooting a TCP/IP 
network is made very easy by using the ping utility in your PC or workstation.

You can ping the router from your PC to verify that the LAN path to your router is set up correctly.

To ping the router from a PC running Windows 95 or later:

1.

From the Windows toolbar, click on the Start button and select Run.

2.

In the field provided, type Ping followed by the IP address of the router, as in this example:

3.

Click on OK.

You should see a message like this one: