Netgear WGT624v3- 108 Mbps Wireless Firewall Router 참조 매뉴얼

Advanced Configuration

6-13

If another device on your network will be the DHCP server, or if you will manually configure the 
network settings of all of your computers, clear the ‘Use router as DHCP server’ check box. 
Otherwise, leave it checked. 

Specify the pool of IP addresses to be assigned by setting the Starting IP Address and Ending IP 
Address. These addresses should be part of the same IP address subnet as the router’s LAN IP 
address. Using the default addressing scheme, you should define a range between 192.168.1.2 and 
192.168.1.253, although you may wish to save part of the range for devices with fixed addresses.

The router will deliver the following parameters to any LAN device that requests DHCP:

•

An IP Address from the range you have defined

•

Subnet Mask

•

Gateway IP Address (the router’s LAN IP address)

•

Primary DNS Server (if you entered a Primary DNS address in the Basic Settings menu; 
otherwise, the router’s LAN IP address)

•

Secondary DNS Server (if you entered a Secondary DNS address in the Basic Settings menu

When you specify a reserved IP address for a PC on the LAN, that PC will always receive the 
same IP address each time it access the router’s DHCP server. Reserved IP addresses should be 
assigned to servers that require permanent IP settings.