Netgear DM111PSPv2 – ADSL2+ Ethernet Modem 사용자 설명서

If you connected the Ethernet cable and quickly launched your browser and typed in the 
modem URL, your computer might need a minute or two to recognize the LAN connection. 
Relaunch your browser and try again. 

If you are having trouble accessing the modem wirelessly, NETGEAR recommends that 
during setup you use an Ethernet cable to connect your computer so that you can log in to 
the modem. 

If you cannot connect to the wireless modem, check the Internet 

Protocol (TCP/IP) properties in the Network Connections section of 
your PC Control Panel. They should be set to obtain both IP and 
DNS server addresses automatically. See your computer 
documentation for more information.

Upgrade Modem Firmware

When you log in and if you are connected to the Internet, the Firmware Upgrade Assistant 
screen displays so you can upgrade to the latest available firmware. See 

Maintenance,

 for more information about upgrading firmware.

Click Yes to check for new firmware (recommended). The modem checks the 
NETGEAR database for new firmware. 

If no new firmware is available, click No to exit. You can check for new firmware later.

If new firmware is available, click Yes to upgrade the modem with the latest firmware. After 
the upgrade, the modem restarts.

Do not try to go online, turn off the modem, shut down the computer, or do 
anything else to the modem until the modem finishes restarting and the 
Power LED has stopped blinking for several seconds.

You cannot upgrade firmware until you have established your Internet connection as 
described in