Netgear DM111PSPv2 – ADSL2+ Ethernet Modem 사용자 설명서

Use Default Address. Use the default MAC address.

Use Computer MAC Address. The broadband ADSL2+ modem will capture and use the 
MAC address of the computer that you are now using. You have to use the one computer 
that is allowed by the ISP.

Use This MAC Address. Enter the MAC address that you want to use.

ADSL Settings

The DSL settings of your modem work fine for most ISPs. However, some ISPs use a specific 
multiplexing method and virtual circuit number for the virtual path identifier (VPI) and virtual 
channel identifier (VCI).

You are required to use the Setup Wizard to select the correct 

country for the default DSL settings to work.



Select Setup > ADSL Settings to display the following screen:

In the Multiplexing Method drop-down list, select LLC-based or VC-based.

For the VPI, type a number between 0 and 255. The default is 0. 

For the VCI, type a number between 32 and 65535. The default is 35.

Click Apply.