Netgear DM111PSPv2 – ADSL2+ Ethernet Modem 사용자 설명서
Security Settings
40
Broadband ADSL2+ Modem DM111PSPv2
4.
The modem has a list of NETGEAR NTP servers. If you would prefer to use a particular
NTP server as the primary server, select the Use this NTP Server check box, and enter its
IP address.
NTP server as the primary server, select the Use this NTP Server check box, and enter its
IP address.
5.
Click Apply to save your settings.
Schedule Firewall Services
If you enabled services blocking in the Block Services screen or port forwarding in the Ports
screen, you can set up a schedule for when blocking occurs or when access is not restricted.
screen, you can set up a schedule for when blocking occurs or when access is not restricted.
To schedule firewall services:
1.
Select Security > Schedule to display the following screen:
2.
To block Internet services based on a schedule, select Every Day, or select one or more
days. If you want to limit access completely for the selected days, select All Day. Otherwise,
to limit access during certain times for the selected days, enter times in the Start Time and
End Time fields.
days. If you want to limit access completely for the selected days, select All Day. Otherwise,
to limit access during certain times for the selected days, enter times in the Start Time and
End Time fields.
Note:
Enter the values in 24-hour time format. For example, 10:30 a.m. would
be 10
hours and 30 minutes, and 10:30 p.m. would be 22 hours and 30
minutes. If you set the start time after the end time, the schedule is effective
through midnight the next day.
through midnight the next day.
3.
Click Apply to save your settings.