Netgear DM111PSPv2 – ADSL2+ Ethernet Modem 사용자 설명서
Network Maintenance
45
Broadband ADSL2+ Modem DM111PSPv2
Automatic Firmware Checking On
When automatic firmware checking is on, the modem performs the check and notifies you if
an upgrade is available or not as shown here.
an upgrade is available or not as shown here.
Figure 9. Firmware upgrade assistant and results screen
To upgrade the firmware:
1.
Click Yes to allow the modem to download and install the new firmware. The upgrade
process could take a few minutes. When the upload is complete, your modem restarts.
process could take a few minutes. When the upload is complete, your modem restarts.
2.
Go to the DM111PSPv2 support page at
http://www.netgear.com/support
, and read the new
firmware release notes to determine whether you need to reconfigure the modem after
upgrading.
upgrading.
Note:
If you get a “Firmware needs to be reloaded” message, it means a
problem has been detected with the modem’s firmware. Follow the
prompts to correct the problem, or see
prompts to correct the problem, or see
72 for a description of the steps.