Netgear DM111PSPv2 – ADSL2+ Ethernet Modem 사용자 설명서
Advanced Settings
59
Broadband ADSL2+ Modem DM111PSPv2
Reserved IP Address Setup
When you specify a reserved IP address for a computer on the LAN, that computer always
receives the same IP address each time it accesses the modem’s DHCP server. Reserved IP
addresses should be assigned to servers that require permanent IP settings.
receives the same IP address each time it accesses the modem’s DHCP server. Reserved IP
addresses should be assigned to servers that require permanent IP settings.
To reserve an IP address:
1.
Select Advanced > LAN Setup, and click the Add button.
2.
In the IP Address field, type the IP address to assign to the computer or server. Choose an
IP
IP
address from the modem’s LAN subnet, such as 192.168.0.x.
3.
Type the MAC address of the computer or server.
Tip:
If the computer is already present on your network, copy its MAC
address from the Attached Devices screen and paste it here.
4.
Click Apply to enter the reserved address into the table.
Note:
The reserved address is not assigned until the next time the
computer contacts the modem’s DHCP server. Reboot the computer
or access its IP configuration to force a DHCP release and renew.
or access its IP configuration to force a DHCP release and renew.
To edit or delete a reserved address entry:
1.
Select the button next to the reserved address that you want to edit or delete.
2.
Click Edit or Delete.
Remote Management
The Remote Management screen lets you allow a user or users on the Internet to configure,
upgrade, and check the status of your modem.
upgrade, and check the status of your modem.