Netgear DM111PSPv2 – ADSL2+ Ethernet Modem 사용자 설명서

Modem Is Off

When you turn the power on, the Power, LAN, and DSL LEDs should light as described here. 
If they do not, refer to the sections that follow for help.



When power is first applied, the Power LED lights.

After approximately 10 seconds, the Ethernet and DSL LEDs light as follows:

a. The Etherent port LED lights when the modem is connected.

b.  The DSL link LED lights to indicate that there is a link to the connected device.

c.  If the Ethernet port is connected to a 100 Mbps device, verify that the Ethernet port’s 

LED is green. Note that if the Ethernet device is 10 Mbps, the LED is amber.

Power LED Is Off

If the Power and other LEDs are off when your modem is turned on:

Check that the power cord is correctly connected to your modem and the power supply 

adapter is correctly connected to a functioning power outlet. 

Check that you are using the 12V DC power adapter supplied by NETGEAR for this 

product.

If the error persists, you could have a hardware problem and should contact NETGEAR 
technical support.