Netgear DM111PSPv2 – ADSL2+ Ethernet Modem 사용자 설명서

Cannot Load an Internet Web Page

If your modem can obtain an IP address, but your browser cannot load any Internet web 
pages:

Your computer might not recognize any DNS server addresses. 

A DNS server is a host on the Internet that translates Internet names (such as www 
addresses) to numeric IP

 

addresses. Typically your ISP provides the addresses of one or 

two DNS servers for your use. If you entered a DNS address during the broadband 
ADSL2+ modem’s configuration, reboot your computer, and verify the DNS address. 
Alternately, you can configure your computer manually with DNS addresses, as explained 
in your operating system documentation.

Your computer might not have the modem configured as its TCP/IP router.

If your computer obtains its information from the modem by DHCP, reboot the computer, 
and verify the modem address.

TCP/IP Network Not Responding

Most TCP/IP terminal devices and modems have a ping utility for sending an echo request 
packet to the designated device. The device responds with an echo reply to tell whether a 
TCP/IP network is responding to requests.

Test the LAN Path to Your Modem

You can ping the modem from your computer to verify that the LAN path to your modem is set 
up correctly.



From the Windows taskbar, click the Start button, and select Run.

In the field provided, type ping followed by the IP address of the modem, as in this example:

Click OK.

a. You should see a message like this one:

“Pinging <IP address> with 32 bytes of data”

b.  If the path is working, you see this message:

“Reply from < IP address >: bytes=32 time=NN ms TTL=xxx”

c.  If the path is not working, you see this message:

“Request timed out”

If the path is not functioning correctly, you could have one of the following problems:

Wrong physical connections