Netgear WN2000RPTv2 - Universal WiFi Range Extender 사용자 설명서

Enter the encryption keys. You can manually or automatically program the four data 

encryption keys. These values must be identical on all computers and access points in your 

network:

Passphrase. To use a passphrase to generate the keys, enter a passphrase, and 

click Generate. This automatically creates the keys. Wireless computers must use 
the passphrase or keys to access the extender. 

Not all wireless computers support passphrase key generation. If 

your computer does not support the passphrase, then you will need 
to type the encryption key in order to join the wireless network. 

Key 1–Key 4. These values are not case-sensitive. You can manually enter the four 

data encryption keys. These values must be identical on all computers and access 
points in your network. Enter 10 hexadecimal digits (any combination of 0

–

9, a

–

f, or 

A

–

F).

Select which of the four keys will be the default. 

Data transmissions are always encrypted using the default key. The other keys can be 
used only to decrypt received data. The four entries are disabled if WPA-PSK or WPA 
authentication is selected. 

Click Apply to save your settings.

Extender IP Address Setup

Select extender Maintenance > IP Address to display the following screen:

The IP Address screen shows whether the extender is set to get its IP address dynamically 
from the router (this is the most common setting), or is set as a static IP address.

Get Dynamically From Router. The wireless network router assigns an IP address when 

the extender connects to its wireless network. Most networks are set up so that the router 
automatically does this.