Netgear PR2000 - Trek N300 Travel Router and Range Extender 사용자 설명서
Supplemental Information
143
Trek N300 Travel Router and Range Extender PR2000
Factory Settings
You can return the Trek to its factory settings. Use the end of a paper clip or a similar object
to press and hold the Reset button for at least seven seconds. The Trek resets, and returns
to the factory configuration settings shown in the following table.
to press and hold the Reset button for at least seven seconds. The Trek resets, and returns
to the factory configuration settings shown in the following table.
Table 4. Factory default settings
Feature
Default Behavior
Router login
User login URL
User name (case-sensitive)
admin (printed on product label)
Login password (case-sensitive)
password (printed on product label)
Internet
connection
connection
WAN MAC address
Use default hardware address
WAN MTU size
1500
Port speed
10/100 Mbps Autosensing
Local network
(LAN)
(LAN)
LAN IP
192.168.168.1 (printed on product label)
Subnet mask
255.255.255.0
DHCP server
Enabled
DHCP range
192.168.168.2 to 192.168.168.200
Allow a registrar to configure this
router
Enabled
DHCP starting IP address
192.168.168.2
DHCP ending IP address
192.168.168.200
DMZ
Disabled
Time zone
GMT-8 for NA
GMT+1 for GR, PE, UK
GMT+4 for RU
GMT+7 for PR
GMT+10 for AU
GMT+1 for GR, PE, UK
GMT+4 for RU
GMT+7 for PR
GMT+10 for AU
Time zone adjusted for daylight
saving time
saving time
Disabled
SNMP
Disabled
Firewall
Inbound (communications coming
in from the Internet)
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
out to the Internet)
Enabled (all)
Source MAC filtering
Disabled