Netgear WPN311 - RangeMax Wireless PCI Adapter 설치 가이드
)NSTALLATION
NETGEAR RangeMax™ Wireless PCI Adapter WPN311
These basic setup instructions assume that you will connect to an access point using the
default security options. See the online help and the NETGEAR RangeMax™ Wireless
PCI Adapter WPN311 User Manual on the NETGEAR CD for instructions on configuring
wireless security, Ad-hoc mode, or advanced options.
default security options. See the online help and the NETGEAR RangeMax™ Wireless
PCI Adapter WPN311 User Manual on the NETGEAR CD for instructions on configuring
wireless security, Ad-hoc mode, or advanced options.
Estimated Completion Time: 15-25 minutes.
1. First, install the WPN311
software.
Insert the NETGEAR CD. If the CD main
page does not appear, double click
Autorun.exe on the CD.
page does not appear, double click
Autorun.exe on the CD.
a.
Click Install the Software. The Check
for Updates window opens.
for Updates window opens.
b.
If you are connected to the Internet, click
Check for Updates. If not, you can
choose to install from the CD.
Check for Updates. If not, you can
choose to install from the CD.
c.
Follow the Wizard steps and click Next to continue.
When the software has been installed the Connection Wizard prompts you to shut
down the computer.
down the computer.
2. Now, install the wireless PCI adapter card.
a.
Shut down your computer and unplug the power cord.
b.
Open the case and insert your WPN311 Wireless PCI Adapter into a PCI slot.
c.
Connect the antenna to the adapter and position the antenna to the up position.
d.
Close the case, plug the power cord back in, and restart your computer.
The WPN311 software automatically runs.
e.
Select the country domain where you are located from the drop-down list and
click Agree.
click Agree.
3. Use the Smart Wizard to set up your wireless PCI adapter.
a.
Windows 2000 users go to Step b. Windows
XP or Vista users can set up the wireless
adapter either with the NETGEAR Smart
Wizard (recommended) or the Windows
configuration utilities.
XP or Vista users can set up the wireless
adapter either with the NETGEAR Smart
Wizard (recommended) or the Windows
configuration utilities.
•
NETGEAR Smart Wizard: Reveals
more information about each network
and makes it easier to troubleshoot
network connection problems.
more information about each network
and makes it easier to troubleshoot
network connection problems.
•
Windows configuration utilities: See the Windows documentation or
“Using Windows XP and Vista Wireless Configuration Utilities” at:
http://documentation.netgear.com/reference/enu/winzerocfg/index.htm
“Using Windows XP and Vista Wireless Configuration Utilities” at:
http://documentation.netgear.com/reference/enu/winzerocfg/index.htm
b.
Click Next to accept the NETGEAR Smart
Wizard.
Wizard.
You will be prompted to let the Connection
Wizard guide you (recommended).
Wizard guide you (recommended).
c.
Click Finish to accept.
4. Connect to a wireless network.
a.
Select the wireless network from the drop-
down list, and the wizard records your
choice.
down list, and the wizard records your
choice.
Note: Hidden networks do not broadcast
the Network Name (SSID). These
networks are in the drop-down list,
but the Network Name (SSID) is
blank.
networks are in the drop-down list,
but the Network Name (SSID) is
blank.
If the network uses security, then the Smart
Wizard detects it.
Wizard detects it.
b.
Follow the Wizard steps for Security (if used) and for saving a Profile.
c.
After you have reviewed the settings, click Finish.
The Connection Wizard initiates your wireless connection. It could take up to a
minute for your wireless connection to be established.
minute for your wireless connection to be established.
Using the Status Bar
The status bar is located at the bottom of the Settings page.
Note: To optimize throughput, connect to a network with a high-speed router or access
point, and a high-speed Internet connection. For more information about optimizing
wireless performance, and network bandwidth, see the Installation Guide for the
NETGEAR RangeMax™ Wireless PCI Adapter WPN311 on the NETGEAR CD.
wireless performance, and network bandwidth, see the Installation Guide for the
NETGEAR RangeMax™ Wireless PCI Adapter WPN311 on the NETGEAR CD.
Understanding the Status Bar
Wireless network
Identifies which wireless network you have joined.
Security
• Locked: security enabled.
• Unlocked: security not enabled.
• Unlocked: security not enabled.
Channel
The wireless channel used by the network. If many wireless networks
in your area use the same channel they can interfere with one
another.
in your area use the same channel they can interfere with one
another.
Throughput
Wireless throughput measured in Mega bits per second.
Signal strength
More dots indicates a stronger signal. Usually, you will experience
higher throughput when the signal is strongest.
higher throughput when the signal is strongest.
Find a Network
Click Find a Network to open the Connection Wizard.
Connection
status
status
Identifies the status of your network connection.
• Connected to Internet: Wireless Internet connection is OK.
• Connected to Router: Wireless connection to the router is OK but
• Connected to Internet: Wireless Internet connection is OK.
• Connected to Router: Wireless connection to the router is OK but
the router is not connected to the Internet.
• 169.254.x.x or ___.___.___.___ : The wireless connection to the
router is OK but there is a problem with the router. See the online
help or the Installation Guide for the NETGEAR RangeMax™
Wireless PCI Adapter WPN311 on the NETGEAR CD for
troubleshooting tips.
help or the Installation Guide for the NETGEAR RangeMax™
Wireless PCI Adapter WPN311 on the NETGEAR CD for
troubleshooting tips.
Wireless
network
Connection status
Security
Find a Network
Channel
Throughput
Signal
strength
strength