Netgear WN1000RP - WiFi Range Extender for Mobile 사용자 설명서
Getting Started
9
WiFi Booster for Mobile WN1000RP
2
As you move the booster, check the LEDs until you find a location where the Link Rate LED
is green or amber, and the PC to Booster LED
is green or amber, and the PC to Booster LED
is green.
3
You might have to unplug the booster as you move it to a different location. If you do, from
the new location, power up the booster and continue to check the LEDs.
Once the LEDs show that the booster is in a good location, open a browser and go to
http://www.mywifiext.net to continue the setup process.
http://www.mywifiext.net to continue the setup process.
Performance
The Link Rate LEDs indicate the performance of the
2.4 GHz wireless connection from the booster
to a router.
•
The best performance is delivered when the Link Rate LED is green.
•
A workable performance is delivered when the Link Rate LED is amber.
•
A red Link Rate LED indicates a poor connection or no connection between the booster
and the router.
and the router.
•
Make sure that your
PC to Booster LED is green before you check the Link Rate
LED for performance.
To improve booster performance:
1
Move the booster closer to the router or to a different location with a better line of sight.
2
As you move the booster, check the Link Rate and the PC to Booster LEDs on the booster
until you find a good location. These LEDs should remain solid green.