Netgear WNDA3100v1 – RangeMax Dual Band Wireless-N USB 2.0 Adapter 설치 가이드

)NSTALLATION

These setup instructions assume that you will connect to an access point or wireless router.

Estimated completion time:10 minutes.

To complete this installation you must:

1.

Install the WNDA3100 software.

2.

When prompted, insert the wireless USB adapter and follow the Windows XP Found 
New Hardware wizard prompts (unless using Vista).

3.

Set up the wireless USB adapter to connect to your wireless network.

Insert the Resource CD. If the CD main page 
does not display, browse the files on the CD 
and double-click Autorun.exe.

a.

Click Install the Software. The Software 
Update Check screen displays. 

b.

NETGEAR recommends that you 
upgrade when new firmware is available. 
If you are connected to the Internet, click 
Check for Updates. If not, install from the CD.

The NETGEAR Smart Wizard Welcome screen displays.

c.

Follow the onscreen instructions to install the NETGEAR WNDA3100 software. 

•

For Windows XP, if a Windows logo testing message appears, click 
Continue Anyway. 

•

If a message that Windows Vista cannot verify the publisher of this driver 
displays, click Install this driver software anyway.

d.

When the NETGEAR Smart Wizard Installation Complete screen displays, click 
Next.

After you have installed the NETGEAR Smart Wizard, the following screen displays:

a.

Insert the wireless adapter in a USB port on your computer.

•

For best results, put the wireless adapter at least 4 feet (1 meter) away from 
your router. 

•

To use the USB cable, connect it to the wireless USB adapter and a USB 
port. See “Placing the USB Adapter Cradle” on the other side of this 
document.

b.

For Windows Vista computers, the adapter and driver are automatically added. 
Click Next and then go to Step 3. For Windows XP computers, the Found New 
Hardware Wizard displays. 

c.

Follow the onscreen instructions for the Found New Hardware Wizard.

d.

When the NETGEAR Smart Wizard screen returns, click Next. 

a.

Windows XP or Vista users can set up the 
wireless adapter either with the NETGEAR 
Smart Wizard (recommended) or the 
Windows configuration utilities. 

•

NETGEAR Smart Wizard. Reveals 
more information about each network 
and makes it easier to troubleshoot 
network connection problems.

•

Windows configuration utilities. See 
the Windows documentation or the NETGEAR application note at: 
http://documentation.netgear.com/reference/enu/winzerocfg/index.htm.

b.

Click Next.

You are prompted to let the 
wizard help you connect to a 
network (recommended).

c.

Click Next to proceed. 

To use the Connection Wizard:

1.

Select a wireless network from the drop-down list. The wizard records your choice.

Note: Hidden networks do not broadcast the network name (SSID). These networks 
are in the drop-down list, but the Network Name (SSID) field is blank.

If the network uses security, then the Smart Wizard detects it. 

2.

Follow the wizard steps for security (if used) and for saving a profile.

3.

After you have reviewed the settings, click Finish.

The WNDA3100 icon 

 appears in the system tray and on the desktop; the Settings tab 

displays. The wizard initiates your wireless connection. It could take up to a minute for 
your wireless connection to be established. Check the status bar. See “Using the Status 
Bar” on the other side of this document.

Hidden