Netgear WN111v2 - N300 Wireless USB Adapter 사용자 설명서

1-6

The LED on the wireless-N USB adapter indicates the condition of the wireless link, as described 
in the following table.

You can remove the wireless adapter software in these two ways:

•

Select the Windows Start menu > RangeMax Wireless-N USB 2.0 Adapter WN111v2 program 
group > uninstall option, and then follow the screen prompts.

Channel

The wireless channel used by the network. If many wireless networks in your 
area use the same channel, they can interfere with one another.

Data rate

To optimize the wireless data rate (throughput), connect to a network with a high-
speed router or access point and a high-speed Internet connection. See 

Signal strength

More dots indicates a stronger signal. Usually, you experience higher throughput 
when the signal is strongest.

Join a Network

Click Join a Network to start the Connection Wizard.

Connection 
status

The status of your network connection.
• Connected to Internet. The wireless Internet connection is OK.
• Connected to Router. The wireless connection to the router is OK, but the 

router is not connected to the Internet.

169.254.x.x or ___.___.___.___. The wireless connection to the router is OK, 
but there is a problem with the router. See the online help or 

.

Off 

• The wireless-N USB adapter is not plugged in to the USB 

port.

• The wireless-N USB adapter is in power save mode (default 

from power up or reset).

Blinking

• The wireless-N USB adapter is scanning for a network.
• The wireless-N USB adapter is sending or receiving data.

Solid

The wireless-N USB adapter is connected to a wireless 
network, but it is not sending or receiving data.