Netgear WG511v2 - 54 Mbps Wireless PC Card 32-bit CardBus 사용자 설명서

4-12

Network Connections and Wireless Security

3. Select the WEP encryption strength you will use. 

The choices are:

•

64-bit WEP data encryption 

•

128-bit WEP data encryption

4. Select Create with Passphrase and enter the passphrase. The configuration utility will 

automatically generate the WEP keys.

If the passphrase method is not available in the other devices, you must manually enter the 
keys to match exactly what is in the access point and other 802.11b wireless devices.

5. Save your settings in a Profile. 

a.

Click the Save Profile button. All the configuration settings are saved in this profile. 

b. Click Apply. 

c.

Click Close to exit the configuration utility.

Follow the steps below to configure WPA2-PSK Security.

1. Run the WG511v2 Smart Wizard.

a.

Make sure the WG511v2 software is installed and the WG511v2 is fully inserted in an 
available CardBus slot in your laptop computer.

Note: Larger encryption keys require more processing and may slow the 

communications response times.

Note: The characters are case sensitive. Be sure to use the same passphrase for all the 

wireless devices in the network.