Netgear R6200v2 – Smart WiFi Router AC1200 Dual Band Gigabit 사용자 설명서
Hardware Setup
9
R6200v2 Smart WiFi Router
Front and Side Panels
The router front and side panels have the status LEDs and buttons shown in the following
figure.
figure.
LEDs
WiFi On/Off button
WPS button
Figure 2. Router front and side view
Table 1. Front panel LED descriptions
LED
Description
Power
•
Solid amber. The router is starting.
•
Blinking amber. The firmware is upgrading, or the Reset button was pressed.
•
Solid green. The router is ready.
•
Blinking green. The firmware is corrupted. Visit
•
Off. Power is not supplied to the router.
Internet
•
Solid green. The Internet connection is ready.
•
Solid amber. The Ethernet cable connection to the modem has been detected.
•
Off. No Ethernet cable is connected to the modem.
Wireless
•
Solid blue. The wireless radio is operating in either 2.4 GHz or 5 GHz mode.
•
Blinking. The router is in WPS mode.
•
Off. The wireless radios are off for both 2.4 GHz and 5 GHz.
USB
•
Solid blue. The router has accepted the USB device. The USB device is ready to be used.
•
Blinking blue. A USB device is plugged in and is trying to connect.
•
Off. No USB device is connected;, or someone clicked the Safely Remove Hardware button,
and it is now safe to remove the attached USB device.
and it is now safe to remove the attached USB device.