Netgear R6200v2 – Smart WiFi Router AC1200 Dual Band Gigabit 사용자 설명서
Advanced Settings
93
R6200v2 Smart WiFi Router
5.
Click the Add button.
The screen changes back to the list screen.
6.
Add each computer or device you want to allow to connect wirelessly.
7.
Select the Turn Access Control On check box.
8.
Click the Apply button.
To edit a wireless device or delete it from the access list:
1.
Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings screen displays.
2.
In the table, select the radio button next to the wireless device that you want to edit or
delete.
delete.
3.
Do one of the following:
•
Click the Edit button.
The Edit Wireless Card screen displays.
a. Edit the address information.
b. Click the Accept button.
•
Click the Delete button.
The address is removed from the table.
Wireless Access Point
You can set up the router to run as an access point (AP) on the same local network as
another router.
another router.
To set up the router as an AP:
1.
Use an Ethernet cable to connect the Internet port of this router to a LAN port in the
other router.
other router.
Cable this port to a LAN port
on the other router
on the other router
2.
Select ADVANCED > Advanced Setup > Wireless Settings.
3.
Select the Enable Access Point Mode check box.