Netgear R6200v2 – Smart WiFi Router AC1200 Dual Band Gigabit 사용자 설명서

station in either radio band and use the other radio band as a wireless router or wireless base 
station, dual-band concurrent mode is not affected.

For you to set up a wireless network with WDS, both access points have to meet the following 
conditions:

Both access points have to use the same SSID, wireless channel, and encryption mode.

Both access points have to be on the same LAN IP subnet. That is, all of the access point 
LAN IP addresses are in the same network.

All LAN devices (wired and wireless computers) are configured to operate in the same 

LAN network address range as the access points.

The wireless repeating function works only in hub and spoke mode. The units cannot be 
daisy-chained. You have to know the wireless settings for both units. You have to know the 
MAC address of the remote unit. First, set up the base station. Then set up the repeater.



Set up both units with the same wireless settings.

The SSID and mode need to be the same and the wireless security option has to be set to 
None. (See 

25.)

Select ADVANCED > Advanced Setup > Wireless Repeating Function.

Select the Enable Wireless Repeating Function check box.

Select the Wireless Base Station radio button.

(Optional) Select the Disable Wireless Client Association check box to prevent wireless 
clients from associating with the base station and allow LAN client associations only. 

You can leave the check box cleared if you prefer wireless clients to be able to associate 
with the base stations.