KitchenAid Built-In 60K BTU Side Burner 설치 가이드

Counter or support surfaces must be level.

The installation of this Power™ burner must conform with local 
codes or, in the absence of local codes, with either the National 
Fuel Gas Code, ANSI Z223.1/NPFA 54, Natural Gas and Propane 
Installation Code, CSA B149.1, or Propane Storage and Handling 
Code, B149.2.

Copies of the standards listed may be obtained from:
CSA International
8501 East Pleasant Valley Rd.
Cleveland, Ohio 44131-5575

NOTE: The outdoor Power™ burner drops into the enclosure 
opening and is supported by its side flanges. No bottom support 
is needed.

The following dimension chart and illustration include cutout dimensions and minimum spacing requirements for all built-in outdoor 
products. The illustration is for reference. The design of your cabinet layout can be personalized, but the dimensions for the cutouts and 
minimum spacing must be followed.

*NOTE: Maintain a minimum 

³⁄₄" (1.9 cm) countertop overhang from the door/drawer mounting surface to help keep water runoff from 

the countertop out of the door or drawer.

**Each corner of countertop cutouts for built-in grill, side burner, sear burner, Power™ burner and refreshment center.

E 

H

A

G

K

K

F

K

B

J

E

M

L

K

K

D

D

C

C