Xerox XEScan Solution 사용자 가이드
17
Installing Printers
(XEScan Reflection only)
Highlight the printer type you want to select in the field Available Printers and then click on the red arrow. You can
also double-click on the printer. You will then proceed to the printer configuration wizard.
This assistant will take you step by step through the installation and calibration of your printer.
Connection
In this first window you can enter your preferred type of connection.
If you connect to the printer via SCSI directly, you should select SCSI.
In order to achieve maximum performance it is recommended to choose Output System. The output subsystem
works as a spooler for the SCSI printer. You should select a spooling folder either on a local hard disc or on a
remote computer if you want to install the output subsystem on another PC.
If you connect to the printer via SCSI directly, you should select SCSI.
In order to achieve maximum performance it is recommended to choose Output System. The output subsystem
works as a spooler for the SCSI printer. You should select a spooling folder either on a local hard disc or on a
remote computer if you want to install the output subsystem on another PC.
Medium
Here you can select the paper types you want to work with. All paper types with the indication "User defined" can
be renamed by double-clicking on the entry. You can use the context menu (right mouse click) to make the
selection easier.
be renamed by double-clicking on the entry. You can use the context menu (right mouse click) to make the
selection easier.
Hardware
As the calibration depends on the media that are used, you need to enter which media are currently in your
printer. The picture on the left shows the position of the rolls in the printer (roll 1 and roll 2). Please be sure to
enter the sizes and the media selection correctly.
printer. The picture on the left shows the position of the rolls in the printer (roll 1 and roll 2). Please be sure to
enter the sizes and the media selection correctly.