Xerox Document Workstation with PlotWorks Support & Software 사용자 가이드
PlotWorks User Guide • The Scanner Interface • Chapter 9-9
you get the scanner configured correctly for that type of image, click Auto
scan. All scans will be made at the current settings. (This option is not
available for some scanners.)
scan. All scans will be made at the current settings. (This option is not
available for some scanners.)
Please note that due to hardware limitations, when using Auto Scan, digital files
cannot be created larger than the original. When Auto Scan is selected, you can
only scan in standard, or reduced sizes. If you wish to scan in larger, or non-
standard sizes, deselect Auto Scan, and then enter the size manually.
cannot be created larger than the original. When Auto Scan is selected, you can
only scan in standard, or reduced sizes. If you wish to scan in larger, or non-
standard sizes, deselect Auto Scan, and then enter the size manually.
There is no need to click on the Start button because the scanner will start
scanning as soon as the document is loaded.
scanning as soon as the document is loaded.
•
Scan right button (available on the 7356 scanner only): By selecting this
option, the user inserts the document on the right 36” mark. The image is not
center-oriented.
option, the user inserts the document on the right 36” mark. The image is not
center-oriented.
•
Eject combo box: Allows you to select one of the following auto eject
options; Front, Back and None. This option is available on the Xerox 7356
and Vidar scanners only. The Xerox 7396 always ejects from the back.
options; Front, Back and None. This option is available on the Xerox 7356
and Vidar scanners only. The Xerox 7396 always ejects from the back.
•
Error beep button: Click this button to enable an alarm when the software
cannot auto detect the document size (not available on the Xerox MAX 200,
8180, Océ, or KIP scanners).
cannot auto detect the document size (not available on the Xerox MAX 200,
8180, Océ, or KIP scanners).
•
Compress in scanner (Xerox 7336 only): When enabled, file compression
takes place in the scanner memory.
takes place in the scanner memory.
•
Save button: Lets you save the current scanning configuration. (Note: You
can only save your own custom configurations. You cannot change the
Default configuration.)
can only save your own custom configurations. You cannot change the
Default configuration.)
•
Delete button: Lets you delete the selected configuration. (Note: You cannot
delete the Default configuration, or any of the other preset
configurations.You can only delete your own custom configurations)
delete the Default configuration, or any of the other preset
configurations.You can only delete your own custom configurations)
•
Stop button: Stops the scanner and the ejects the image being scanned.
•
Start button: Starts the scanner if it is not set to autoscan mode.
The File Naming/Viewing tab window
This tab window lets you set up options for naming and saving scanned images.
You can also select an image viewer other than the PlotWorks Image Viewer, with
which to view scanned images.
You can also select an image viewer other than the PlotWorks Image Viewer, with
which to view scanned images.