Xerox Document Workstation with PlotWorks Support & Software 사용자 가이드
PlotWorks User Guide • The Job Editor • 4-13
•
C: The image was prechecked successfully. All needed information and
reference files, etc., exist
reference files, etc., exist
•
P: The image was processed successfully
•
F: The file could not be processed or printed due to fatal errors.
Job tickets created with DOS PlotWorks, display the following statuses:
•
?: The image was printed with warnings
•
±: The image was corrected with Error Free Printing
•
*: The image was printed successfully
•
Qty: Stands for Quantity. Enter the number of copies to print, up to 99. Enter
X or 0 for overlays and other files you do not want to print.
X or 0 for overlays and other files you do not want to print.
•
Size: Select the original image size. To enter a custom size, select User
Specified, then enter the width, height, and origin values on the Specified
Size tabbed dialog box. To auto detect the image size, select Auto Detected.
Specified, then enter the width, height, and origin values on the Specified
Size tabbed dialog box. To auto detect the image size, select Auto Detected.
•
Media: Select a printing medium.
•
Output: Select a finished size for the print, or select a percentage of the
original size. To enter a custom size, open the Detail Property Sheet and
click on the Output Setup tab. In the field labeled Output Size, select User
Specified, then enter the width, height, and origin values. To force the use of
the closest standard media size, select Auto Standard.
original size. To enter a custom size, open the Detail Property Sheet and
click on the Output Setup tab. In the field labeled Output Size, select User
Specified, then enter the width, height, and origin values. To force the use of
the closest standard media size, select Auto Standard.
•
Pens: This field always displays User Specified. To use a different pen set,
use the Pens tabbed dialog box or import a previously defined pen set.
use the Pens tabbed dialog box or import a previously defined pen set.
•
Format: The image file data format. The Job Editor automatically detects
this format when you use the Add Files option. PLP recommends that you do
not change automatically detected format values.
this format when you use the Add Files option. PLP recommends that you do
not change automatically detected format values.
•
Scale: This column is used only for AutoCAD or MicroStation files. Enter
one of the following in this cell:
one of the following in this cell:
•
A valid AutoCAD scale (printed units = drawing units).
•
A valid MicroStation scale (master units per inch) for MicroStation DGN
files.
files.
•
FIT, for automatic scaling depending on the Specified Size. Refer to
“Specified Size tabbed dialog box” on page 4-18 for more information.
“Specified Size tabbed dialog box” on page 4-18 for more information.
Scaling to FIT cannot be used when the Specified Size is set to Auto Detected.
•
Plot by: This column only applies to AutoCAD or MicroStation drawings
and is used to select printing boundaries. The following boundaries are
available:
and is used to select printing boundaries. The following boundaries are
available: