Xerox XCounter Page Accounting Support & Software 사용자 가이드
Mar 2001
XCOUNTER FOR NT USER REFERENCE MANUAL
25
Installing XPopup support
Once XCounter software has been installed and configured for Standard Page
Accounting, the client charge back accounting method may be implemented if
required. To install this type of accounting, there must be a client code database
installed. To install this client database, please refer to the section “Maintaining the
XPopup database”. Once this client database has been established, the following
procedure may be used to install and configure the server for the XPopup client:
Accounting, the client charge back accounting method may be implemented if
required. To install this type of accounting, there must be a client code database
installed. To install this client database, please refer to the section “Maintaining the
XPopup database”. Once this client database has been established, the following
procedure may be used to install and configure the server for the XPopup client:
•
Launch XControl from the Start/Programs/XCounter for NT menu.
From the graphic interface select Domain/Server on which XCounter is installed on
and press the “
and press the “
X
” button on the tool bar.
•
At this point an XCounter server configuration dialog box will appear. Select
the “Popup” tab. A Popup configuration window will appear.
the “Popup” tab. A Popup configuration window will appear.
•
Select the “Window type” and make any other required modifications or option
changes then “Apply” the changes. Please refer to the section “Server
configuration” for more detailed information.
changes then “Apply” the changes. Please refer to the section “Server
configuration” for more detailed information.
The printer configuration specifies whether or not the XPopup client is enabled.
This means that only printers that require the XPopup client need to be configured.
The following procedure will enable the printer for the XPopup client:
This means that only printers that require the XPopup client need to be configured.
The following procedure will enable the printer for the XPopup client: