Xerox WorkCentre 5865/5875/5890 관리자 가이드
Security
WorkCentre 5845/5855/5865/5875/5890 Multifunction Printer
97
System Administrator Guide
Setting the Security Level
Unless you have acquired McAfee Integrity Control, Xerox recommends that you keep the security level
set to the default setting, Enhanced Security.
McAfee Embedded Control has three security levels:
• Enhanced Security
• Integrity Control
• Disabled
• Enhanced Security
• Integrity Control
• Disabled
Note:
Only set the security level if necessary. The printer comes standard with an Enhanced Security
level, which is adequate in many cases.
1. In CentreWare Internet Services, click
1. In CentreWare Internet Services, click
Properties > Security.
2. Click
McAfee Embedded Control.
3. To enable McAfee Embedded Control features, and configure Alert Feedback options, click
Edit.
4. To set the Security Level, under Security Level, select
Enhanced Security or Integrity Control. To
turn off McAfee Embedded Control security features, select
Disable McAfee Embedded Control.
Xerox recommends that you do not disable this feature.
5. If you selected Enhanced Security as the security level, click
Save.
6. If you selected Integrity Control as the security level, click
Next, enter the software feature
installation key, then click
Apply.
Note:
When you change the security level setting, the printer restarts. The process takes several
minutes.
Setting the Alert Options
You can configure the printer to alert you when a security event occurs.
To set the alert options:
1. In CentreWare Internet Services, click
1. In CentreWare Internet Services, click
Properties > Security.
2. Click
McAfee Embedded Control.
3. To configure Alert Feedback options, click
Edit.
4. To configure the printer to send email alerts:
a. Under Locally on the Device, click
Email Alerts, then Save.
b. Next to E-mail Alerts, under Action, click
Edit.
c. Under Recipient Group Addresses, enter valid email addresses for each applicable group 1, 2, or
3.
d. For each group with email addresses, select
Enable Group.
e. Under Recipient Group Preferences, for McAfee Embedded Control, select each group that you
want to receive alerts:
Group 1, Group 2 and Group 3.
f. Click
Apply.
g. At the prompt, click
OK.