Xerox Phaser 7500 사용자 가이드
Network Basics
Phaser 7500 Color Printer
User Guide
User Guide
32
Using the Control Panel
To manually set the IP address:
1. On the control panel, select
Printer Setup > Connection Setup > Network Setup > TCP/IPv4
Setup, then press the OK button.
2. Select
DHCP/BOOTP, then press the OK button to select Off.
3. Select
IPv4 Address, then press the OK button.
4. Enter the printer’s IP address, then press the
OK button.
Changing or Modifying the IP Address Using CentreWare IS
CentreWare IS provides a simple interface that enables you to manage, configure, and monitor
networked printers from your desktop using an embedded Web server. For complete information about
CentreWare IS, click the
networked printers from your desktop using an embedded Web server. For complete information about
CentreWare IS, click the
Help button in CentreWare IS to go to the CentreWare IS Online Help.
After setting the printer’s IP address, you can modify TCP/IP settings using CentreWare IS.
1. Launch your Web browser.
2. Enter the printer’s IP address in the browser’s
Address field.
3. Click
Properties.
4. Select the
Protocols folder on the left navigation panel.
5. Select
TCP/IP.
6. Enter or modify the settings, and then click
Save Changes at the bottom of the page.
See also:
System Administrator Guide
at
Default Router/Gateway address
Router address is required to communicate with the
host device from anywhere other than the local
network segment.
host device from anywhere other than the local
network segment.
Information Required for Manual IP Addressing