Xerox Phaser EX7750 설치 가이드

In addition, you can enable the Printed queue, which is a storage area for the most 
recent jobs from the Print queue. The Printed queue makes it convenient to reprint 
those jobs. In Setup, you can enable the Printed queue and specify the maximum 
number of jobs retained in the queue (see 

page 4-15). Reprinting jobs in the Printed queue requires the job management tools.

To use the Fiery utilities and WebTools, you must enable at least one of the 
print connections.

Jobs sent to the Hold queue are spooled to the EX7750 hard disk for printing at a later 
time or for reprinting. Because the Hold queue is a storage place, jobs sent to it cannot 
proceed through the printing process until the operator intervenes using the job 
management tools (see the

This is the standard EX7750 queue. Jobs sent to the Print queue are processed and 
printed in the order they are received. Jobs prioritized by an operator with the job 
management tools and jobs sent via the Direct connection take priority over jobs sent 
to the Print queue.

The Direct connection transmits jobs directly to the EX7750, but only when the 
EX7750 is Idle. If the EX7750 is busy, the job remains at the user workstation until 
the EX7750 is ready. The job is then processed as soon as the previous job is finished 
and before the next queued job is processed. 

Jobs sent to the Direct connection are not stored on the EX7750 hard disk, and cannot 
be selected for reprinting, moving, or deletion. Jobs sent to the Direct connection do 
appear in the Job Log, for accounting purposes.

To download fonts to the EX7750, you must publish the Direct connection.

The Direct connection is not supported for LPR printing.