Xerox Phaser 140 사용자 가이드

Getting Set Up

User Manual

2-31

10.

Assign the printer to a port:

Select the printer from the list of installed printers.

Choose the Connect button to display the Connect dialog box.

Set the Transmission Retry value to 850. Refer to your
Windows documentation for details.

Select a port:

Interface

Select

Parallel

LPT1

or LPT2

Network

Network

button

If you selected a parallel port, go on to Step e.

If you clicked on the Network button, the Printers Ð Network
Connections

dialog box appears. Fill in each item according

to your conÞguration. Refer to your Windows documentation
for details or ask your network administrator for help.

Note

The printerÕs conÞguration page contains the information you
need to set up the printer port. For information on generating a
conÞguration page, see ÒPrinting the conÞguration pageÓ on page 6-17.

Click

in the Connect dialog box and close the Printers

dialog box.

Note

If you are using Windows 3.1, you can use the Phaser 140 with
the standard Microsoft Windows PostScript driver (by adding a
WPD speciÞc to the Phaser 140). With the standard driver, you
get the printer page size information, but you do not get color
corrections and other PostScript Level 2 features; those features
are only available through the Tektronix driver for Windows 3.1.
For details on updating the standard Microsoft Windows
PostScript driver, refer to the manual Phaser 140 Drivers and
Utilities Printing Reference

The manual Phaser 140 Drivers and Utilities Printing Reference provides a
detailed driver installation procedure and complete information on using
the Tektronix driver or the standard Windows PostScript driver with the
printer.