Xerox Phaser 340 사용자 가이드
A
Modifying Printer Operations
A-12
Phaser 340 Drivers and Utilities
Macintosh users
1.
Install the utility files from either the Phaser 340 CD-ROM or the
Printer Software for Macintosh diskette; refer to page 2-2 for
instructions.
Printer Software for Macintosh diskette; refer to page 2-2 for
instructions.
2.
Select the appropriate printer in the Chooser.
3.
Locate the LaserWriter Utility in the PhaserTools folder on your hard
disk, and double–click its icon to start the application.
disk, and double–click its icon to start the application.
4.
Choose Download PostScript File from the Utilities menu.
5.
Select one of the following files from the list, then click Open.
(These files were installed in the Phaser 340 Utilities folder inside
the PhaserTools folder.)
(These files were installed in the Phaser 340 Utilities folder inside
the PhaserTools folder.)
■
Use the Menu Short file to disable the printing features menus on
the printer’s front panel.
the printer’s front panel.
■
Use the Menu Long file to expand the printer’s front panel to show
all menus.
all menus.
6.
At the prompt Save PostScript output as: you are asked
for a file name for saving printer output. Use either the default
name given in the edit box or type a new name.
for a file name for saving printer output. Use either the default
name given in the edit box or type a new name.
7.
Click Save to send the file to the printer.
8.
If no output is returned by the printer, the LaserWriter Utility
displays a dialog box; click OK to continue.
displays a dialog box; click OK to continue.