Xerox Phaser 1235 전단
Advanced Features and Troubleshooting Manual
13
Loading Print Media
Loading Print Media
Selecting Print Media
This chapter will help you understand what kinds of paper and other print media to use
with the printer and also how to properly position the media in the printer’s paper trays.
with the printer and also how to properly position the media in the printer’s paper trays.
The printer supports a variety of media types and sizes.
■
Supported media and media sizes on page 15 lists the sizes of paper, envelopes and
other print media for use with the printer’s paper trays.
■
The printer supports weights of paper as follows:
■
60-176 g/m
2
(16-47 lb. bond) via the standard and optional paper trays
■
60-203 g/m
2
(16-54 lb. bond) via the Multi-sheet Bypass Feeder (MBF)
■
75-105 g/m
2
(20-28 lb. bond) for automatic 2-sided printing via the MBF
■
Media especially sensitive to curl (transparencies, labels, etc.) should be output to the
face-up bin at the rear of the printer instead of to the standard face-down bin on top of
the printer.
face-up bin at the rear of the printer instead of to the standard face-down bin on top of
the printer.
■
To use the printer’s automatic 2-sided printing capability:
■
The optional duplex module must be installed.
■
Only media with a weight from 75 to 105 g/m
2
(20-28 lb. bond) should be used. All other
media weights must be printed 1-sided.
Note
Do not attempt 2-sided printing on transparencies, labels, envelopes, postcards,
card stock or glossy paper. The Multi-sheet Bypass Feeder will not feed media
heavier than 28 lb. bond paper.
card stock or glossy paper. The Multi-sheet Bypass Feeder will not feed media
heavier than 28 lb. bond paper.
■
The paper must feed from a 530-sheet tray (Tray 1, Tray 2 or Tray 3). If paper is fed from
the Multi-Sheet Bypass Feeder, it may not be printed 2-sided automatically, but may be
printed 2-sided manually.
the Multi-Sheet Bypass Feeder, it may not be printed 2-sided automatically, but may be
printed 2-sided manually.
■
Use only Xerox Phaser 35 Series transparencies as other transparencies may cause
damage to the fuser. Any damage caused due to the use of unsupported media will
not be covered by your printer’s warranty.
damage to the fuser. Any damage caused due to the use of unsupported media will
not be covered by your printer’s warranty.