Xerox Phaser 3020 사용자 가이드

Network Installation

Xerox® Phaser® 3020
User Guide

11. Select OK when the acknowledgement message displays.

Note:

Enabling or disabling the TCP/IPv6 protocol will take effect after the system is rebooted.

Enabling or disabling TCP/IPv6 will impact other protocols, for example LPR/LPD, SNMP, Raw
TCP/IP Printing and DHCPv6 over TCP/IPv6.

Test Access

At your workstation, open the Web browser and enter the TCP/IP Address of the machine in the
Address bar. Press Enter.
If you use the domain name to specify the machine, use the following format.
http://myhost.example.com
If you use the IP address to specify the machine, use one of the following formats depending on
your machine configuration. An IPv6 address needs to be enclosed in square brackets.
IPv4: http://xxx.xxx.xxx.xxx
IPv6: http://[xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]

Note:

If you have changed the port number from the default port number “80”, append the

number to the Internet address as follows. In the following examples, the port number is 8080.

Domain name: http://myhost.example.com:8080
IPv4: http://xxx.xxx.xxx.xxx:8080
IPv6: http://[xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]:8080

Verify that the home page of CentreWare Internet Services displays.

The CentreWare Internet Services installation process is complete.

Note:

When your access to CentreWare Internet Services is encrypted, enter https:// followed by

the Internet address, instead of http://.