Xerox Phaser 3020 사용자 가이드

Windows Drivers

Xerox® Phaser® 3020
User Guide

24

With the custom installation, you can choose individual components to install.
1.

Make sure that the printer is connected to your computer and powered on.

2.

Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window appears. If the installation 
window does not appear, select Start and Run. Type X:\Setup.exe, replacing "X" with the letter 
which represents your drive and select OK.
If you use Windows Vista, select Start > All Programs > Accessories > Run, and type X:\Setup.exe.

Note:

If the AutoPlay window appears in Windows Vista, select Run Setup.exe in the Install

run program field, and select Continue in the User Account Control window.

3.

Select Install Software. A Printer Connection Type window displays.

4.

Select your connection type and select Next. The Select Software to Install window displays.

5.

Select Custom from the Setup type dropdown box.

6.

Select the components to be installed and select Next. 

Note:

When you select an option, a description of that option displays at the bottom of the 

screen.

7.

Select Advanced Options if you would like to do any of the following:
•

Change the printer name

•

Change the default printer

•

Share the printer with other users on the network

•

Change the destination path where driver files and user guide files will be copied to. Click 
Browse to change the path.

8.

Select OK to continue, then select Next. The Copying Files window displays followed by the 
Installing Software window.

9.

After the installation is finished, the Setup Completed window displays. 

10. Select Print a test page and select Finish.

If your printer is connected to the computer, a Test Print pageprints. If the Test Print operation is 
successful, continue on to the

 Print 

chapter of this guide. If the print operation failed, refer to the 

Troubleshooting

 chapter.

Follow the steps below to install Windows drivers for wireless printing.
1.

Make sure that the printer is connected to your computer with a USB cable and powered on. 

2.

Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and 
an installation window appears.
If the installation window does not appear, select Start and Run. Type X:\Setup.exe, replacing “X” 
with the letter which represents your drive and select OK.
If you use Windows Vista, select Start > All programs > Accessories > Run, and type X:\Setup.exe. 
If the AutoPlay window appears in Windows Vista, select Run Setup.exe in Install or run program 
field, and select Continue in the User Account Control window.