Xerox DocuColor 12 Printer with Splash G620 사용자 가이드
PN: 0016964-0101
Control Point Editing
115
Chapter 9: Calibration
•
The new profile name appears in the list of color profiles in the Set Active Profile dialog
box. Note that the new profile is automatically calibrated to the last time calibration was run
as it is created.
box. Note that the new profile is automatically calibrated to the last time calibration was run
as it is created.
7.
Select OK. Selecting OK before saving a profile causes ColorCal to prompt to save changes or
cancel. The new profile is automatically calibrated to the last time calibration was run as it is
created.
cancel. The new profile is automatically calibrated to the last time calibration was run as it is
created.
Control Point Editing
1.
Select a color profile to edit from the color profile popup menu.
2.
Select a color curve to edit from the floating CMYK color curve palette. If the Master curve is
selected, the Edit Control Points button is disabled.
selected, the Edit Control Points button is disabled.
3.
Select the Edit Control Points button.
4.
To edit, drag the curve points with the mouse pointer. Output Percentage (0% to 100%) and
Input Percentage (0% to 100%) update instantly on the right as a curve point is moved.
Input Percentage (0% to 100%) update instantly on the right as a curve point is moved.
•
To add a curve point, click anywhere along the curve. ColorCal allows a maximum of 32
control points for an individual color curve.
control points for an individual color curve.
•
To remove a curve point, drag it over another point on the color curve.
•
A single level of Undo is supported which removes the last change to a control point.
•
To undo all changes to the curve, click Revert.
5.
Select Save to overwrite the existing profile or Save As… to create a new profile.
•
The Save option is disabled when factory profiles are selected because factory profiles are
not editable.
not editable.
•
When using Save As…, enter a profile name for the new profile and then click Save.
•
The new profile name appears in the list of color profiles in the Set Active Profile dialog
box. Note that the new profile is automatically calibrated to the last time calibration was run
as it is created.
box. Note that the new profile is automatically calibrated to the last time calibration was run
as it is created.
Note!
A single level of Undo is supported which removes the last change applied. The Revert button
restores the profile to the last saved state.
restores the profile to the last saved state.
Note!
Factory installed profiles cannot be edited. ColorCal automatically prompts to save with a new
name any factory installed profile selected.
name any factory installed profile selected.
Note!
The color curves created with the Expert Edit controls are similar to those used in Adobe
Photoshop, but cannot be directly exchanged with curves created in Adobe Photoshop.
Photoshop, but cannot be directly exchanged with curves created in Adobe Photoshop.