Intel BX80525KY500512 사용자 설명서
Pentium
®
III Xeon™ Processor at 500 and 550 MHz
60
Datasheet
6.1
Weight
The maximum weight of a Pentium
III
Xeon processor is approximately 500 grams.
6.2
Cartridge to Connector Mating Details
The staggered edge connector layout of the Pentium
III
Xeon processor makes the processor
susceptible to damage from hot socketing (inserting the cartridge while power is applied to the
connector). Extra care should be taken to ensure hot socketing does not occur. The electrical and
mechanical integrity of the processor edge fingers are specified for up to 50 insertion/extraction
cycles.
connector). Extra care should be taken to ensure hot socketing does not occur. The electrical and
mechanical integrity of the processor edge fingers are specified for up to 50 insertion/extraction
cycles.
NOTES:
4. Dimensional variation when cartridge is fully installed and the substrate is bottomed in the connector. Actual
system installed height and tolerance is subject to user’s manufacturing tolerance of SC330 connector to
baseboard.
baseboard.
5. Retention devices for this cartridge must accommodate this cartridge “Float” relative to connector, without
preload to the edge contacts in “X” and “Y” axes.
10.Fully installed dimensions must be maintained by the user’s retention device. Cartridge backout from fully
installed position may not exceed 0.020.
Figure 28. Side View of Connector Mating Details
4.995 ± .036
4
10
5
.049 ± .028
(.144)
FULLY INSTALLED
Z
Y
X