Craftsman LF-20CR 사용자 설명서

FOR ONE YEAR from the date of purchase, this product is warranted against any defects 

in material or workmanship. With proof of purchase, a defective product will be replaced 

free of charge. 
For warranty coverage details to obtain free replacement, visit the web page: 

www.craftsman.com/warranty
This ONE YEAR warranty is void if this product is ever used while providing commercial 

services or if rented to another person. For 90 DAY commercial and rental use terms, 

visit the Craftsman warranty web page. 

This warranty gives you specific legal rights, and you may also have other rights which 

vary from 

Sears Brands Management Corporation, Hoffman Estates, IL 60179

 

 

 

Please read and understand this entire manual before attempting to assemble, operate or
install the product.

 

 
 

 

 

 

Warranty…………………………………………............................Page 2
General Safety Rules.....………………….……............................Page 2-3
Description …………………………….……..................................Page 4
Assembly.………………………………………..............................Page 5
Operation....………………………………………...........................Page 5-6
Care And Maintenance …………………………………….............Pages 6
Troubleshooting...........................................................................Page 7

state to state. 

●  DO NOT operate this product with a damaged cord or plug after a malfunction, or 

      if it is dropped or damaged in any manner.

●  DO NOT operate the unit in the presence of explosive and/or flammable fumes.

●  DO NOT  place the unit or any parts near an open flame, cooking or other heating 

      appliance.    
●  DO NOT  leave children unattended near the fan or leave the fan unattended while in 

     use.

●  DO NOT  use outdoors.                                                          

●  Always use on a dry, level surface.                                                

●  DO NOT operate if the product housing (front or rear grill or product stand) is removed 

      or damaged.

●  A loose fit between the outlet and plug may cause the plug to overheat. Have a qualified
     electrician replace the outlet if the plug doesn't fit properly.  

●  DO NOT  run cord under carpeting. Do not cover cord with throw rugs, runners  or 

     the like. Arrange cord away from traffic areas so that it will not be tripped over.

●  NEVER connect the unit to any power sources other than a 120 volt AC polarized 

      outlet. 

●  To protect against electrical shock, this appliance is equipped with a cord having a 
    3-prong grounding-type plug for insertion into a proper 3-prong grounding-type receptacle. 
    DO NOT alter the plug for use in a 2-prong receptacle. If the plug will not fit into a receptacle, 
    have the proper receptacle installed by a qualified electrician.
   

 

 

Screws

x 2 

x 2 

AA

 Foot Pad

BB

1.Use a phillips head screwdriver to attach the two foot pads (BB) to the bottom of the 
fan stand (F) with the two screws (AA). 

AA

F

BB

A

B

F

C

E

D

A
B
C
D
E
F

Front grill
Fan blade
Rear grill

Rotary switch control
Motor 
Stand

1
1
1
1
1
1

3. Insert power cord 3-prong grounding plug into a proper 3-prong grounded 120 volt wall receptacle.
4. To operate the fan, turn the  rotary switch control to the desired  fan speed (HI, MED, LOW) 
    (see Fig. 2).
5. Tilt the fan back or forward on the stand to adjust the air output direction.

●  Before cleaning, be sure to turn off and unplug the unit.
●  Keep this unit clean. Carefully wipe the unit with a soft, damp cloth. Please be 
     very cautious near the motor.
●  DO NOT immerse the fan in water and never allow water to drip into the motor housing.
●  Never use gasoline, benzene or thinner to clean fan. This will damage the surface 
     of the unit.
●  After cleaning, be sure to completely dry the unit with a soft cloth.

●  Clean unit before storage, then cover with a vinyl bag or place in original shipping 
     box. Store in a cool, dry place.

2. Obstructions are keeping the

    fan from working.

2.  Turn off and unplug fan. Visually 

     inspect for obstructions and remove 

     if found. Plug fan in and turn on.

PROBLEM

POSSIBLE CAUSE 

CORRECTIVE ACTION

The fan will 

not operate.

1. The fan isn’t plugged in and/or 

    the electrical outlet isn’t working

    properly. 

1. Make sure the fan is plugged in and

    /or the electrical outlet is working

    properly.

● To disconnect, grip the plug and pull it from the wall outlet. Never yank the cord.
● The use of attachments not recommended or sold by the appliance manufacturer may 
    cause hazards.
● Avoid contact with moving parts.   

● Always unplug unit before assembly, disassembly or cleaning.
● Always unplug unit when not in use, when moving from one location to another and before 
    cleaning.

● Use this product only as described in this manual.  Any other use not recommended by 
    the manufacturer may cause fire, electrical shock or injury to persons, and may void the 
    warranty. 

1. Make sure the unit is in the OFF position before plugging the unit into the outlet.
2. Place the fan on a dry, level surface.