Craftsman 39942 사용자 설명서

9 ― English

This product requires assembly.
■ Carefully remove the product and any accessories 
from the box. Make sure that all items listed in the 
packing list are included.
■ Inspect the product carefully to make sure no 
breakage or damage occurred during shipping.
■ Do not discard the packing material until you have 
carefully inspected and satisfactorily operated the 
product.
■ If any parts are damaged or missing, do not operate 
the mower. Return it for replacement to the retailer from 
which it was purchased.

■ Insert lower handles ONTO and over the exposed 
attachment plate bolts at the rear of the motor housing. 
Make sure the power cord clips on the handles are 
BOTH facing up. On each side, place washer over bolt 
tip and thread locking lever onto it. Fold lever down to 
secure handle into position. (Fig. 3)
NOTE: For ease of use, the overall handle pitch angle 
can be raised or lowered by choosing an attachment 
point that is higher or lower on the attachment plate. 
(Fig. 3)
■ Attach the upper handle to the lower one using 
carriage bolts, washers and locking levers. There are 
three adjustment positions. Choose the position which 
is best for you. (Fig. 4)
■ Secure the handle into position by turning the locking 
lever to tighten and then folding the lever down. Do not 
apply excessive force to fold the lever down or it may 
break. Loosen the lever to the point where it will fold 
down without breaking. (Fig. 5)
■ Secure the power cord with the cord clips. (Fig. 6) 

■ Your mower comes with a tool-less collection bag. 
Your bag ships fl at as shown.
■ To assemble the bag straighten the hinged steel 
frame at opening of bag as shown.
■ Pry open the long soft plastic tubular sleeve with 
you fi ngers and insert the steel frame into the tube as 
shown.

 When using the collection bag, do not install the 

mulching plug.
■ Lift the rear discharge door.
■ Lift the collection bag by its handle and place under 
the rear discharge door so that the hooks on the 
collection bag are seated on the door rod.
■ Release the rear discharge door.
■ Mulch plug MUST be removed prior to installing 
collection bag.

 When using the mulching plug, do not install 

the collection bag.
■ Lift the rear discharge door.
■ Grasp the mulching plug by its handle.
■ Insert the plug into the rear discharge opening.
■ Lower the rear discharge door.

Mower
Mulching Plug (already installed)
Dust Blocker Collection Bag
Side Discharge Chute
Bolt x4
Washer x4
Locking lever x4
Cord clip x2
Operator’s Manual

   

If any parts are damaged or 

missing do not operate this product until the parts are 
replaced. Failure to heed this warning so could result in 
serious personal injury.

   

Do not attempt to modify this 

product or create accessories not recommended 
for use with this product. Any such alteration or 
modifi cation is misuse and could result in a hazardous 
condition leading to possible serious personal injury.

   

Do not connect to power supply 

until assembly is complete. Failure to comply could 
result in accidental starting and possible serious 
personal injury.

   

Never operate the mower 

without the proper safety devices in place and working. 
Never operate the mower with damaged safety 
devices. Failure to heed this warning can result in 
serious personal injury.